IKY 39X21MM OEM Style Dual Dash Light Push Button Switch For Toyota Landcruiser, Prado, Hilux, RAV4, Fortuner, Camry, Corolla, Tacomo, Tundra, Kluger

Product Name: 3 Gang aluminum plate 5PIN double light switch Product material: aluminum substrate +ABS flame retardant, high and low temperature environmental protection material. Input voltage: 12V/24V Rated current: 12V:20A 24V:10A IP Rating: IP65 Operating Temperature: -13℉~176℉/ -25 ℃ ~ 80 ℃ The number of PIN feet: 5PIN

Product name : rocker switch panel holder Material : aluminum Color : black Way : 2way, 3way, 4way, 5way, 6way Size :2way:6.7cmx7.3cm;3way:6.7cmx9.5cm;4way:6.7cmx12.6cm;6way:6.8cmx17.9cm Fitment : for all cars,motorcycles, buses,boats,RVs,trailers,etc. Features : high quality ,durable, easy installation Note : 1.JUST A HOLDER .Rocker switches are not included!!! 2.We provide clear pictures ,measurement where possible.Please check as much as possible to make sure the item the one that you need. 3The actual item maybe has slight color distinct with listing image due to different computer screens ,thanks for your understanding. 4.The size of item is manual measurement,please allow 0.5-1inch difference.(1inch=2.54cm) Package included : 1 x rocker switch panel holder 4 x mount screws

Specifications: Fit for Nissan Patrol Y62 Shell Color: Black Material: ABS Input Voltage: DC 12V Features: 5-wire Car LED Light dual push button Switch Easy to install in the oem mounting hole.

Material: ABS, nylon, aluminum plate Light Color: Blue Item Color: Black Switches Available:5 Gang (LED LIGHT BAR, SPOT LIGHTS, SIDE LIGHTS, ROOF LIGHTS, ZOMBIE LIGHTS, DRIVING LIGHTS AND SO ON) Amp Rating per circuit:15amp Max Operating Temperature: -25 degree to 80 degree Electrical Life:10000 make and break cycles at full load IP Rating:IP67 Size:approx. 16.5*4*7.5cm Package Included: 1* Switch Panel 4* Screws

Specifications: Color: Green, Blue, Red Input voltage: DC12V / 24V Suitable: Universal Car ,Boat,Truck Material Type:ABS + Aluminum face panel USB socket output: Dual DC 5V 4.2A Size :See the picture Package Included: 1 x Switch Panel 1 x Labels 4 x Screws

Overview: Compatible with the Toyota OEM style light switch (1.28 x 0.87inch , 33 x 22mm) PERFECT FIT - This high quality SPST (Single Pole Single Throw) ON-OFF push switch is manufactured to fit in the factory space available in your Toyota car. Gives your vehicle an upgraded look with this backlit switch. STURDY CONSTRUCTION - The switch is made out of heavy duty ABS plastic and come in a mate black surface color. The surface size is 1.28 x 0.87 . The switch comes with short circuit protection to protect your vehicles, ensure years of service. Safe and long lasting COMPATIBILITY - Replacement for Toyota Sequoia 2008-ON / Replacement for Toyota Highlander 2008-ON / Replacement for Toyota Tacoma 2012-ON (Center ONLY) / Replacement for Toyota Tundra 2008-ON / Replacement for Toyota 4Runner 2010-ON / Replacement for Toyota RAV4 2008-2012 / Replacement for Toyota Yaris 2473 CUSTOMIZATION - we offer a wide variety of designs and color. However you cannot find the switch you want please contact us for a CUSTOM PUSH BUTTON.

Rocker Switch: Loop Circuit: ON-OFF Maximum power: 240W Input voltage: DC12/ 24V Protection class: IP65 Dual USB Port: Working voltage: 12-24V Output current: 3.1A Output voltage: 5V Don't mix up the Cigarette Lighter Socket with the 12V charger. Working voltage: 12 Output voltage: 12-24V colour: blue/Red/Green Material: ABS Size: See the picture

Rocker Switch: ● Submerged in water operation is not recommended ● Made of environmentally friendly anti-retardant materials ● Waterproof casing will protect the switch from rain or coffee spill ● Output circuit protection, overload protection & reverse polarity protection ● Unlike some knock off rocker switch which marked 15 Amp but support less than 12Amp, our switches are capable of handling real 20Amp current on 12 Volt Voltmeter: ● Used to monitor the battery voltage and battery voltage state ● Measuring DC voltage, with anti-reverse, short circuit protection ● Real-time detection of battery voltage, using a battery used under normal operating voltage package include : ● 1 pc switch panel

Material: Nylon 66 Housing Symbol: Laser Etched LED Colour: Blue/RED/YELLOW/GREEN/WHITE Voltage: 12V, 3amp relay required Switching: Push dual Pole/dual Throw Plug: 5 x Leads Mounting Dimensions: 22.7mm x 16.4mm Actuator Dimensions: 43.1mm x 26.7mm

Double Control OEM Replacement Switch with Twin L.E.D Lights. This switch is an aftermarket switch that locks into your existing panel super easy to install. Black hard surface. Rated at 3amp 12V. Dual Color (Blue / Green) LED light. It uses the original mounting hole of the vehicle. All symbols are Laser etched directly onto the switch face using modern high Tech laser engraving equipment to ensure long image life.